TMS-6115-585-12
NAVFAC P-8-262-12
TO-35C2-3-455-1
TM-05684C-12
Figure 4-25. Lockout Switch and Gear
continuity between connector (8) pins A and B on lead
c. Remove. Disconnect switch lead from connector
from switch. Reconnect switch. operate engine at
(8). Remove two screws (9) and lockwash ers (10)
operating speed, disconnect connector (8) and
attaching switch to engine back plate. Carefully re-
between pins A and B on switch. check that switch is
move switch taking care to to lose thrust plunger
open (no continuity).
4-32
