TM 5-6115-584-12NAVFAC P-8-622-12TO-35C2-3-456-1TM-05682C-12Inspect to see that there is no dirt or oil underneath lens in-dicating that gauge is no longer properly sealed. Check to seethat pointer is not bent or damaged. Check that markings ongauge are readable. Check to see that meter is fastened secure-ly to engine.h. Flexible Oil Lines (see figure 1-1). Inspect flexible oil linesto the oil pressure gauge and the oil cooler for physical damage.Check for leaks especially around fittings.i. Engine Stop Solenoid (see figure 3-22). Inspect stopsolenoid (1) for dents or other physical damage. Check thatsolenoid is securely attached to cylinder shroud bottom panwith two screws (2) and lockwashers (3). Check that electricalconnections (4) to solenoid are clean and tight.j. Oil Dip-Stick and Housing (see figure 1-1). In-spect oil dip-stick and housing (9) for physical dam-age. Check for leaks especially at gasket betweenFigure 3-23. Battery and Frame3-26Change 4
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
