TM 5-6115-584-12
NAVFAC P-8-622-12
TO-35C2-3-456-1
TM-05682C-12
APPENDIX B
COMPONENTS OF END ITEMS LIST
Section I. INTRODUCTION
B-1. SCOPE.
This appendix lists Integral Components of and Basic
Issue Items (BII) for the 5KW Generator Set to help you
inventory items required for safe and efficient operation.
B-2. GENERAL.
The components of end item list are divided into the
following sections:
a. Section II. Integral Components of the End Item.
These Items, when assembled, comprise the 5KW Gener-
ator Set and must accompany it whenever it is transferred
or turned in.
b. Section III. Basic Issue Items.
These are minimum essential items required to place the
5KW Generator Set in operation, to operate it and to per-
form emergency repairs. Although shipped separately
packed, they must accompany the Generator Set during
operation and whenever it is transferred between account-
able officers. The illustrations will assist you with hard-to-
identify items. This manual is your authority to requisition
replacement BII based on Table(s) of Organization and
Equipment (TOE) /Modification Table of Organization and
Equipment (MTOE) authorization of the end item.
B-3. EXPLANATION OF COLUMNS.
a. Illustration: This column is divided as follows:
(1) Figure Number. Indicates the figure number of
the illustration on which the item is shown (if applicable).
(2) Item Number. The number used to identify item
called out in the illustration.
b. National Stock Number (NSN); Indicates the national
stock number assigned to the end item which will be
used for requisitioning.
c. Part Number (P/N): Indicates the primary number
used by the manufacturer which controls the design and
characteristics of the item by means of its engineering
drawings, specifications, standards and inspection require-
ments to identify an item or range of items.
d. Description: Indicates the federal item name and
if required, a minimum description to identify the item.
e. Location. The physical location of each item Iisted
is given in this column. The lists are designed to inven-
tory all items in one area of the major item before moving
on to an adjacent area.
f. Quantity Required (Qty Reqd): This column lists
the quantity of each item required for a complete major
item.
g. Quantity: This column is left blank for use during
inventory. Under the received column, list the quantity
you actually receive on your major item. The date columns
are for use when you inventory the major item at a later
date, such as for shipment to another site.
Change 2 B-1
