TM 5-6115-584-12
NAVFAC P-8-622-12
TO 35C2-3-456-1
TM-05682C-12
b.
Installation.
See figure 5-4.
Install left panel
assembly to left support assembly, side closure assembly and
front and top panel assemblies as follows:
(1) Position left panel assembly (3) on left support
assembly (4) and install three screws (11) and locknuts (12), and
six washers (13 and 14) securing left panel assembly (3) to side
closure assembly (15) .
(2) Torque screws (11) to 16 ±2 ft-lbs dry.
(3)
Install three screws (8) and washers (9) securing
left side panel assembly (3) to top panel assembly (10).
(4)
Torque screws (8) to 18 ±2 in.-lbs dry,
(5)
Install three screws (5) and washers (6) securing
left panel assembly (3) to front panel assembly (7).
(6) Torque screws (5) to 18 ±2 in.-lbs dry.
(7)
Install three screws (1) and washers (2) securing
left panel assembly (3) to left support assembly (4).
(8) Torque screws (1) to 18 ±2 in.-lbs dry.
5-6.
RIGHT PANEL ASSEMBLY.
a.
Removal.
See figure 5-5.
Remove right panel assembly
from right support assembly, rear closure assembly and rear, top
and front panel assemblies as follows:
(1) Remove five screws (1) and washers (2) securing
right panel assembly (3) to right support assembly (4).
(2) Remove three screws (5) and washers (6) securing
right panel assembly (3) to front panel assembly (7).
(3)
Remove four screws (8) and washers (9) securing
right panel assembly (3) to top panel assembly (10).
(4) Remove two screws (11) and locknuts (12), and four
washers (13 and 14) securing right panel assembly (3) to rear
closure assembly (15) and remove two screws (16) and washers (17)
securing right panel assembly (3) to rear panel assembly (18) and
lift off right panel assembly (3).
5 - 1 2
C h a n g e 7