Remove seven screws

Fiqure 5-3. Top Panel Assembly and Exhaust Plenum, Removal and Installation

Figure 5-4. Left Panel Assembly, Removal and Installation

TM-5-6115-584-12 Generator Set Diesel Engine Driven Tactical Skid Mtd. 30 Kw 3 Phase 4 Wire 120/208 and 240/416 Volts Manual
Page Navigation
128

TM 5-6115-584-12 NAVFAC P-8-622-12 TO 35C2-3-456-1 TM-05682C-12 (2) Remove seven screws (7) and locknuts (8), and 14 washers (9 and 10) securing top panel assembly (3) to side closure assembly (11) and rear closure assembly (12). (3) Lift off top panel assembly (3). b. Installation. See figure 5-3. Install top panel assembly to left, right and front panel assemblies and to side and rear closure assemblies as follows: (1) assembly (4) side closure (2) Position top panel assembly (3) on left panel right panel assembly (5), front panel assembly (6), assembly (11), and rear closure assembly (12). Install seven screws (7) and locknuts (8), and 14 washers (9 and 10) securing top panel assembly (3) to side closure assembly (11) and rear closure assembly (12). (3) Install 11 screws (1) and washers (2) securing top panel assembly (3) to left panel assembly (4), right panel assembly (5) and front panel assembly (6). (4) Torque screws (7) to 16 ±2 ft-lbs dry. (5) Torque screws (1) to 18 ±2 in.-lbs dry. 5-5. LEFT PANEL ASSEMBLY. a. Removal. See figure 5-4. Remove left panel assembly from left support assembly, side closure assembly, and front and top panel assemblies as follows: (1) Remove three screws (1) and washers (2) securing left panel assembly (3) to left support assembly (4). (2) Remove three screws (5) and washers (6) securing left panel assembly (3) to front panel assembly (7). (3) Remove three screws (8) and washers (9) securing left panel assembly (3) to top panel assembly (10). (4) Remove three screws (11) and locknuts (12), and six washers (13 and 14) securing left panel assembly (3), to side closure assembly (15) and lift off left panel assembly (3). 5 - 1 0 Change 7

Privacy Statement
Press Release
Contact