CHAPTER  11 LIFTING FRAME REPAIR INSTRUCTIONS 11-1.    General. The  lifting  frame  provides  center  support  for  the housing  and  mounts  to  lift  eye  devices  for  hoisting. 11-2.   Removal   and   Disassembly. a.  Remove  generator  set  housing  and  lifting frame    components. Refer  to  the  Operator  and  Organ- izational   Maintenance   Manual. b.   Refer   to   Operator   and   Organizational   Mainte- nance  Manual  and  remove  the  fuel  tank  to  allow  re- moval  of  bottom  bolts  holding  supports.  (30  and 31,   fig.   11-1.) c.   Remove   and   disassemble   the   lifting   frame   as illustrated   in   figure   11-1. 11-3. Cleaning  and  Inspection. Refer   to   Operator   and   Organizational   Maintenance Manual. a.   Clean   the   lifting   frame   with   cleaning   solvent, Federal    Specification    P-D-680. b.   Use   a   stiff   bristled   brush   to   remove   heavily concentrated   grease   and   dirt. c.   Inspect   the   lifting   frame   for   cracks   and   dis- tortion. 11-4. Repair. Repair  the  lifting  frame  by  replacement  of  damaged parts.   (fig.   11-1.) 11-5. Reassembly    and    Installation. Reassemble   and   install   lifting   frame   in   reverse   order of   disassembly.   (fig.   11-1.) KEY  to  Fig.  11-1. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. Nut Washer Screw Bracket Nut Washer Screw Washer Bracket Nut Washer Screw Nut Washer Screw Nut Washer Screw Bracket Bracket Screw Washer Nut Washer Screw Washer Washer Washer Nut support support Rivet Plate 11-1