Figure 8-8. Short (e) Repeat paragraph (d) for autotrans- formers T-2 and T3. The test results should be the same as for T1. Repeat paragraph (d) for all 3 autotransformers. The test results should be the same. (6) Make a point-to-point check of all wiring and chassis -mounted components. (See schematic diagrams in Chapter 1.) 8-14 Change 1 Circuit ME 6115-545-34/8-8 Cl Relay Test Set-up

Figure 8-9. Overvoltage Relay Test Set-Up

TM-5-6115-545-34 Generator Set Diesel Engine Driven Tactical Skid Mtd. 30 Kw 3 Phase 4 Wire 120/208 and 240/416 Volts Manual
Page Navigation
179

Figure 8-8. Short (e) Repeat paragraph (d) for autotrans- formers T-2 and T3. The test results should be the same as for T1. Repeat paragraph (d) for all 3 autotransformers. The test results should be the same. (6) Make a point-to-point check of all wiring and chassis -mounted components. (See schematic diagrams in Chapter 1.) 8-14 Change 1 Circuit ME 6115-545-34/8-8 Cl Relay Test Set-up b. Precise Relay Box Assembly (Mode I, Class 1 Sets). (1) Inspect all components for signs of physi- cal damage. (2) To test the underfrequency relay, see figure 8-12 and test as follows:

Privacy Statement
Press Release
Contact