STEP 1.
REMOVE WING NUTS AND RETAINER.
STEP 2.
CAREFULLY REMOVE DIRTY FILTER ELEMENT.
STEP 3.
CLEAN INSIDE OF HOUSING.
STEP 4.
CLEAN FILTER ELEMENT BY EITHER METHOD A OR B
DESCRIBED BELOW.
CAUTION
DO NOT CLEAN IN GASOLINE OR
OTHER PETROLEUM SOLVENT.
METHOD A.
COMPRESSED AIR
DIRECT COMPRESSED AIR (100 PSI MAX.) THROUGH PANEL OPPOSITE DIRECTION
OF ARROWS ON ELEMENT DECAL OR OPPOSITE AIRFLOW DIRECTION.
METHOD B.
WASHING WITH WATER
SOAK 15 MINUTES IN WATER AND MILD DETERGENT. RINSE UNTIL CLEAN. AIR DRY
DO NOT USE COMPRESSED AIR.
STEP 5.
INSTALL FILTER ELEMENT.
STEP 6.
INSTALL WING NUTS AND RETAINER AND TIGHTEN WING NUTS
FINGER TIGHT.
Figure 3-5.
Air Cleaner Service
3-14C h a n g e 7
