TM 5-6115-465-12
TO 35C2-3-446-1
NAVFAC P-8-625-12
TM 06858B/06859D-12
(2) Fork Lift. Insert forks
of fork lift into openings on skid
base (figure 1-1). Lift the
generator set onto the carrier. If
the distance is short and the
terrain permits the generator set
may be transported with the fork
lift. If acoustic suppression kit
is installed, both side panel skirts
must be raised and secured.
(3) Skidding. Attach a sling
through the pipes provided in the
skid base and connect to a suitable
vehicle for skidding to the desired
location. Generator set cannot be
skidded if acoustic suppression kit
is installed.
(4) Shipment. Movement over
greater distances requires that the
generator be prepared for shipment
in accordance with paragraph 1-4.
If acoustic suppression kit is
installed, the inlet/discharge turns
must be removed to reduce the cube
of the generator set. For air
shipment, inlet/discharge turns can
be turned on their sides and placed
on trailer fenders. Place a band or
strap around the entire unit to
secure the inlet/discharge turns.
REINSTALLATION AFTER MOVEMENT.
Refer to paragraph 2-3 and
install the generator set in
accordance with the instructions
provided.
Change 13
