P-8-627-34 T O 35C2-3-442-2
TM-07464A-35 TM 5-6115-457-34
Figure 13-7. Dummy load kit control box harness (sheet 3 of 3)
to cathode (-), value should be low. Re-
WARNING
verse meter leads, value should be
Welding operations produce heat,
infinity.
highly toxic fumes, injurious
radiation, metal slag and air-
d. Test load dumping relay K5 as
borne particles. Welding gog-
specified in paragraph 13-13.
gles, with proper tinted lenses,
apron or jacket and welder's
e . Inspect parts for cracks, breaks,
boots are required.
distortion and dents.
a. Repair cracked metal parts by welding.
b. Straighten damaged or distorted
f. Inspect threads for damage.
sheet metal parts using suitable tools.
c. Repair wiring harness as specified
13-26.
REPAIR.
in figure 13-7.
13-21
Change 8
