Figure 13-7. Dummy load kit control box harness (sheet 2 of 3)

P-9-TM-457-35 T.O. 35C2-3-442-2

TM-07464A-35 TM 5-6115-457-34

insulation resistance using a 500 volt meg-

voltmeter should indicate 35 volts. Connect

ger, resistance should be greater than 1

power supply and ammeter to terminals 3

magohm. Connect a 50, 60, or 400 hertz

and 4 with ammeter in series with terminal

0.5 ampere power supply to terminals 1

3. Turn on power supply, ammeter should

and 2 of transformer. Connect a 0-3

indicate less than 0.05 amperes and volt-

ampere ammeter in series with power sup-

meter should indicate 35 volts, Remove

ply and terminal 1. Connect a 0-50 VAC

test equipment from transformer.

5 and 6. Turn on power supply, ammeter

c. Test forward and reverse resist-

should indicate less than 0.05 amperes and

ante of diodes. Measured from anode (t)

13-20

Change 1