P-8-627-34
T O 35C2-3-442-2
TM-07464A-35
TM 5-6115-457-34
Figure 8-11. Fan drive assembly, exploded view
Legend to figure 8-11:
1.
Bolt (2)
7.
Lockplate
13.
Bearing
2.
Lock washer (2)
Plate
8.
14.
Plug
3.
Washer (2)
9.
Bearing
15.
Pulley assembly
4.
Fan mounting hub
100
Retaining ring
16.
Seal
5.
Gasket
Spacer
11.
17.
Spindle and
6.
Screw (2)
12.
Retaining ring
bracket assembly
a. Install seal (16) with lip away from
Refer to figure 8-10 and install fan
bearing (13). Lubricate sealing lip (16)
drive group in reverse order of index
lightly with engine oil.
numbers assigned. Pay particular attention
to the following.
WARNING
a. Before installing fan drive assembly
Grease, (MIL-G-23827) is moderately
(9, figure 8-10), place fan belts and alter-
toxic to skin, eyes and respiratory
t r a c t . Eye and skin protection re-
nator belt on crankshaft pulley and fan
quired. Good general ventilation
drive pulley.
is normally adequate.
b. Hand pack bearings (9 and 13) with
grease MIL-G-23827 before reassembly.
b. Refer to Operator and Organizational
c . Completely fill cavity between bear-
Maintenance Manual and tighten fan and
ings (9 and 13) with grease MIL-G-23827.
alternator drive belts. Install fan guard
and orfice ring on radiator shroud.
8-37. INSTALLATION.
8-24
Change 8
