P-9-TM-457-35 T.O. 35C2-3-442-2
TM-07464A-35
TM 5-6115-457-34
CHAPTER 2
GENERAL MAINTENANCE INSTRUCTIONS
Section I. REPAIR PARTS, SPECIAL TOOLS, AND EQUIPMENT
2-1.
SPECIAL TOOLS AND EQUIPMENT.
Support) and Depot Maintenance Repair
Parts and Special Tools List.
There are no special tools and equip-
ment required to perform intermediate
2-3.
SPECIALLY DESIGNED (FABRI-
(field) (direct and general support) and
CATED) TOOLS AND EQUIPMENT.
depot maintenance on generator sets
Models MEP007A, MEP106A, and
MEP116A. Recommended tools are listed
The specially designed tools and
in table 2-1.
equipment illustrated in figure 2-1 and
listed in table 2-2 are for intermediate
2-2.
ORGANIZATIONAL. INTERMEDIATE
(field) (direct and general support) and
(FIELD) (DIRECT SUPPORT AND
depot maintenance personnel performing
GENERAL SUPPORT) AND DEPOT
maintenance on the generator set. The
MAINTENANCE REPAIR PARTS.
tools and equipment listed in table 2-2
are not available for issue, but must be
Refer to Organizational, Inter-
fabricated by qualified maintenance
mediate (Field) (Direct Support and General
personnel.
Figure 2-1. Specially designed tools (fabricated)
(sheet 1 of 3)
2-1
Change 1
