TM 5-6115 400-12
Figure 2-7. Starting instructions.
position.
Electrical faults in the
(2) Connect a suitable copper wire (No.
generator set, load lines, and load
6AWG) between the ground terminals of both
equipment can cause injury or
generator sets to provide a common ground.
electrocution from contact with an
See that both units are properly grounded (para
ungrounded system.
Warning:
Before making connections for
(3) Connector jumper cables between like load
parallel operation, be sure the
terminals of each unit (L1 to L1, L2 to L2, etc.)
generator sets are not operating 2-12
and that all switches are in the off
2-12