TM 9-6115-668-13
1. Install filter box FK (16) on back panel of power distribution unit (3) and secure using four screws (19) four serrated
lock washers (20) and washers (21).
2. Noting correct labeling and position, install cables (17) to input connection strip (15) of filter box FK (16).
3. Noting correct labeling and position, install cables (18) to output connection strip (14) of filter box FK (16).
4. Install cover (13) on filter box FK (16) and secure with eight screws (10), eight serrated lock washers (11) and eight
washers (12).
5. Close control cabinet connector panel (9) and remove wooden props.
6. Secure with eighteen screws (6), eighteen serrated lock washers (7) and eighteen washers (8).
7. Stow prop (5) and close front panel (4).
8. Close flap (2).
5-137
