TM 9-6115-668-13
N O T E
Installation procedure for auxiliary contractor K5 (41), K6 (42), K7 (43),
K8 (47), K9 (48), K15 (54), K16 (55), K18 (56), K27 (61) is the same as for
auxillary contractor K28 (20), described below.
1 . Hook top (25) of auxiliary contractor K28 (20) into mounting bar (38) and clip into place at the bot-
tom.
2 .
Noting correct labeling and position. Install cables (23) in lower terminals (22) of auxiliary contractor
K28 (20), and tighten screws (21).
3.
Noting correct labeling and position, install cables (17) to upper terminals (18) of auxiliary contractor
K28 (20), and tighten screws (19).
4.
Stow prop (5) and close front panel (4).
5. Close flap (2).
5-100
