TM 9-6115-668-13
4.90 STARTER MAINTENANCE.
This task covers:
a. Removal
b. Installation
General Mechanic’s Tool Kit
(item 2, appendix B)
Automotive Fuel and Electrical System Repair, Tool Kit
(item 3, appendix B)
Reference
Generator Set 150 kW shut
down,
paragraph 2.5.2
Cable ties
(item 10, appendix F)
Disconnect the negative battery cable first and then the positive bat-
tery terminal cable. Failure to observe this warning could result in se-
vere personal injury or death.
Tag all cables prior to removal to ensure correct connection of the
cables during installation.
1.
Remove unit hood assembly (1, figure 4-67) as instructed in paragraph 4.14.
2.
Remove screw (9), serrated lock washer (8), washer (7), clamp (6), molded part (5) with sealing ring
(4), from positive cable (3).
3.
Remove nut (19), serrated lock washer (18), washer (17), and cable (3) from stud (16).
4.
Remove nut (25), serrated lock washer (24), washer (23), and cables (21, 22), from stud (20).
5.
Remove nut (29), serrated lock washer (28), washer (27), and cable (11) from stud (26) on starter
terminal board (15).
Provide support for the starter. Failure to observe this warning could
result in severe personal injury.
6.
Remove three nuts (12), serrated lock washer (13), and washers (14).
7.
Remove starter (10) from flange of diesel engine (2).
4-222
