TM 9-6115-668-13
3.
4.
5.
6.
7.
8.
9.
N O T E
Before installing in plug, push up snap in hooks (26) of flat connectors.
Noting correct labeling and position, install flat connectors with three cables (23 to 25) on plug (22).
Noting correct labeling and position, install cable 7 (35), washer (36), serrated lock washer (37), nut
(38), and tighten nut (38).
Noting correct labeling and position, install cable 0 (31), washer (32), serrated lock washer (33), nut
(34), and tighten nut (34).
Noting correct labeling and position, install cable 02 (27), washer (28), serrated lock washer (29),
nut (30), and tighten nut (30).
Install plug (22) by plugging on terminals, and secure with locking clip (21).
Install cover (11) on battery charging alternator (9) by sliding along cable (20)
Install four lock washers (13), four washers (14) and four nuts (12) on battery charging alternator (9)
and tighten nuts (12).
10. Install V belts (7) on V belt pulleys (6, 10).
11. Install screw (8). Install screw (3) on bracket (4) (not shown).
12. Tension V belt as instructed in paragraph 4.34.
13. Slide plate (19) on cover (11) of battery charging alternator (9), and install two screws (17) and ser-
rated lock washers (18).
14. Install air hose (16) and tighten clamp (15).
15. Connect the negative battery cable first and then the positive battery cable.
16. Install unit hood assembly (1) as instructed in paragraph 4.14.
4-220
