TM 9-6115-668-13
1.
Install PANEL DIMMER S16/R2 (33) and serrated lock washer (31) through the rear of front panel
(4).
2.
Install graduated dial (30) on PANEL DIMMER S16/R2 (33) and secure PANEL DIMMER S16/R2
(33) with nut (29).
Rotateshaft PANEL DIMMER S16/R2 all the way counterclockwise; be-
fore tightening, set pointer of rotary knob to zero on graduated dial
(OFF position of switch S16).
3.
4.
5.
Slide rotary knob (28) on PANEL DIMMER S16/R2 (33), set pointer to zero position, and secure
rotary knob (28) with slotted nut (26) on PANEL DIMMER S16/R2 (33).
Install cover cap (27) on rotary knob (28) and slotted nut (26).
Noting correct labeling and position, solder cables (34) on terminals (32) of PANEL DIMMER
S16/R2 (33)
6.
Stow prop (5) and close front panel (4).
7.
Close flap (2).
4 - 1 3 3
