TM 9-6115-668-13
4.43
CONTROL CABINET ASSEMBLY MAINTENANCE.
This task covers:
a. Removal
b. Installation
General Mechanic’s Tool Kit
(Item 2, appendix B)
Automotive Fuel and Electrical System Repair, Tool Kit
(item 3, appendix B)
Wrench, Shop Manufactured
(item 8, appendix B)
Sling/Hoisting Device, Universal
(item 7, appendix B)
Reference
Generator Set 150 kW shut
down,
paragraph 2.5.2
Cable ties
(item 10, appendix E)
Two
Disconnect the negative battery cable first and then the positive bat-
tery terminal cable. Failure to observe this warning could result in se-
vere personal Injury or death.
CAUTION
Tag all cables prior to removal to ensure correct connection of the
cables during installation.
1.
Remove unit hood assembly (1, figure 4-44) as instructed in paragraph 4.14.
2.
Open front panel (3) and secure with prop (4).
3.
Remove eighteen bolts (8), eighteen serrated lock washers (7) and eighteen washers (6) from con-
trol cabinet connection panel.
4.
Open control cabinet connection panel (5) and support the panel.
5.
Remove two nuts (38), two serrated lock washers (37), two washers (36), two screws (34), two
washers (35) and cover (39) from control cabinet assembly (2).
CAUTION
Observe the correct sequence when removing cables and corrugated
hoses and tag the accordingly.
4-104
