TM 9-6115-662-13&P
INSTALLATION
1.
2.
3.
4.
5.
6.
7.
8.
9.
Position front step (3) on cross braces and trailer flame. Insert handbrake
front step (3).
cable (20) through hole in
Install five screws (6), flat washers (7), and new self-locking nuts (8) that secure front step (3) to
chassis.
Install three screws (4), flat washers (5), and new self-locking nuts (9) that secure front step (3) to
trailer frame.
Install seven screws (10), flat washers (l), and new self-locking nuts (2) that secure front step (3) to
fender.
Install two screws (23), flat washers (12), and new self-locking nuts (11) that secure bracket to front
step (3).
Position handbrake bracket (19) and handbrake lever mechanism (15) on front step.
Install two screws (14) that secure cable bracket to front step.
Position handbrake cable (20) on handbrake lever mechanism (15). Insert clevis pin (22) and spacer
(16), and secure with cotter pin (13).
Install either fire extinguisher bracket or accessory box removed in Step 1. Refer to paragraph 4-19
to install accessory box. Install fire extinguisher bracket (paragraph 4-24).
4-23 FRONT PLATFORM MAINTENANCE.
This task covers: a. Removal
b. Installation
INITIAL SETUP
Tools
Tool Kit, General Mechanic’s
(item 1, appendix B)
Materials/Parts
Equipment Conditions
Reference
Trailer support devices are
lowered, paragraph 2-3.2.1.
Nuts, Self-locking
Washers, Lock
4-41
