TM 9-6115-662-13&P
4-24 FIRE EXTINGUISHER BRACKET MAINTENANCE.
This task covers: a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Conditions
Tool Kit, General Mechanic’s
Reference
(item 1, appendix B)
Trailer handbrakes set, front support
leg/landing leg lowered, and rear leveling-
Materials/Parts
support jack lowered; paragraph 2-3.2.1.
Nuts, Self-locking
REMOVAL
1. Remove fire extinguisher from bracket.
2. Remove four self-locking nuts, flat washers, cap screws, and remove fire extinguisher bracket.
INSTALLATION
1. Install fire extinguisher bracket, four cap screws, flat washers, and self-locking nuts. Tighten self-
locking nuts.
2. Place fire extinguisher in bracket.
4-44
