TM 9-6115-662-13&P
REMOVAL
1. Remove two nuts (5, figure 4-18), lock washers (4), flat washers (3), and screws (2) that secure strap
assembly (1) to trailer chassis.
2. Remove strap assembly (l).
INSTALLATION
1. Position strap assembly (1) over mounting holes.
2. Install two screws (2), new lock washers (4) and nut (5) that secure strap assembly.
4-21 FENDER MAINTENANCE.
This task covers: a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Conditions
Tool Kit, General Mechanic’s
(item 1, appendix B)
Reference
Trailer support devices are
lowered, paragraph 2-3.2.1.
Material/Parts
Personnel Required
Nuts, Self-locking
TWO
REMOVAL
1.
2.
Remove seventeen self-locking nuts (5, figure 4-19), flat washers
securing fender (1) to trailer frame. Discard self-locking nuts.
Remove fender (l).
INSTALLATION
1. Position fender (1) on trailer.
2. Install one bolt (2) on front step (6) and one bolt (2) on rear step
loose.
(4), bolts (2), and flat washers (3)
(7), leaving new self-locking nuts
3. Install fifteen bolts (2), flat washers (3 and 4), and new self-locking nuts (5). Tighten all self-locking
nuts.
4-37
