4-16 INDICATOR LIGHT MAINTENANCE.
This task covers: a. Removal
Tool Kit, General Mechanics
(item 1, appendix B)
Both generator sets shut down,
(item 2, appendix B)
Trailer support devices are
Solder gun (item 2, appendix B)
lowered, paragraph 2-3.2.1.
Solder (item 4, appendix E)
Release clamping catch (8, figure 4-13) and open control panel access cover (7).
Remove 8 screws (11), flat washers (9), lock washers (10) and control panel assembly (12). Discard
The switch box assembly has eight lamps. Replacement procedures are the
same for each indicator lamp.
Tag leads connected to each terminal (13) of indicator lamp housing to be replaced, and unsolder
Remove and retain lens (1), O-ring (14) and lamp (2).
Remove mounting nut (6) and internal tooth lock washer (5).
Slide indicator housing (3) out of control panel assembly (12) and remove O-ring (4).