TM 96115-662-13&P
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
l.
WARNING
Steel strapping used in packaging has sharp edges. To avoid injury to personal, use
care when cutting and handling steel strapping.
using metal cutters, carefully cut metal strapping from box covering generator set accessary box, and when
unpacking unit A, the switch box. Remove metal strapping.
Remove box cover over generator set by lifting off the cover.
Refer to figure 4-2 and remove wooden wedges, spacers, and fiberboard caps from around genator set skid
bases.
Technical manuals are packaged and maybe attached to bark material. If so, remove and save technical
manuals.
Remove barrier material from generator sets.
Remove packaged fire extinguisher from within generator set emlosures. Unpack and secure fire extirgtisher
in bracket on trailer.
Open accessory box and remove all packagging cushioning material from accessories.
Using the packing list(s) remove in step a., inventory the accessories. Check missing items against shortage
packing list (if any). Report any discrepancies to your supervisor.
Refer to paragraph 4-19 and install accessory box.
stow accessories in accessory box.
Stow technical manuals in generator set document box.
4-4.2
Checking Unpacked Equipment.
a. Inspect the equipment for damage incurred during shipment, If the equipment has been damaged, report the
damage on SF 364, Report of Discrepancy (ROD).
b.Check the equipment against the packing list(s) to see if the equipment is ccmplete. Report all discrepancies in
accordance with the instructions in DA PAM 738-750.
c. Check to see whether the equipment has been modified.
4-4.3 Deprocessing Unpacked Equipment.
Refer to DA Form 2258, Depreservation Guide for Vehicles and Equipment, packed with the equipment. The depres-
ervation guide explains what was done to the equipment prior to packaging. It also explains what has to be done before
Placing the equipment in operation. Perform all depreservation actions required by the depreservation guide.
4-5 lNSTALLATION INSTRUCTIONS
4-5.1 TOOLS, TEST EQUIPMENT, AND MATERIALS REQUIRED FOR INSTALLLATION.
A general mechanics tool kit is required for installation of the power plant/power unit.
4-5.2
ASSEMBLY OF EQUIPMENT.
Change 2
4-4.1
