TM 9-6115-660-13&P
Section I. GENERAL INFORMATION
1-1 SCOPE.
This manual is for your use in operating and maintaining the Power Plants; AN/MJQ-37 and AN/MJQ-38 (figure 1-1);
Power Units, PU-798, and PU-799 (figure 1-2); and Power Units, PU-798A and PU-799A (figure 1-2.1). The manual
covers operating instructions and operator, unit, and direct support maintenance requirements for the power plants and
power units. It also contains a Repair Parts and Special Tools List (RPSTL) for the power plants and power units. The
power plants and power units are mobile. The power plants and power units may be used to supply electric power to any
system or equipment requiring up to 10 kW of 60 Hz or 400 Hz power.
1-2 MAINTENANCE FORMS AND RECORDS.
Department of the Army forms and procedures used for equipment maintenance will be those prescribed by DA Pam 738-
750 (The Army Maintenance Management System (TAMMS)) (Maintenance Management UPDATE).
1-3 DESTRUCTION OF ARMY MATERIEL TO PREVENT ENEMY USE.
Destruction of Army materiel to prevent enemy use shall be in accordance with TM 750-244-3.
1-4 PREPARATION FOR STORAGE OR SHIPMENT.
Refer to Chapter 4 Section VII.
Figure 1-1. Features of AN/MJQ-37 and AN/MJQ-38.
Change 2 1-2
