5-19 PU-798 AND PU-799 GENERATOR MOUNTING RAIL MAINTENANCE

Figure 5-22. Replace AN/MiQ-37 and AN/IMJQ-38 Generator Mounting Rails.

5-20 PU-798A AND PU-799A GENERATOR MOUNTING RAIL MAINTENANCE

TM-9-6115-660-13P Power Plant Diesel Engine Driven 1-Ton Trailer Mounted (With Racks) 3Kw 60 Hz AN/MJQ-42 Manual
Page Navigation
166

TM 9-6115-660-13&P 5-19 PU-798 AND PU-799 GENERATOR MOUNTING RAIL MAINTENANCE. This task covers: a. Removal b. Installation INITIAL SETUP Tools Equipment Conditions Tool Kit, General Mechanic’s Reference (item 1, appendix B) Trailer handbrakes set, front support Materials/Parts leg/landing leg lowered, and rear leveling-support jack lowered; paragraph Nuts, Self-locking 2-3.2.1. Generator set removed; paragraph 5-6. Accessory box removed; paragraph 4-19. Front platform removed; paragraph 4-24. REMOVAL Remove self-locking nuts (4, figure 5-23), flat washers (2), cap screws (1), and mounting rail (3). INSTALLATION Install mounting rail (3), cap screws (1), flat washers (2), and self-locking nuts (4). Figure 5-23. Replace PU-798 and PU-799 Generator Mounting Rail. 5-42 Change 2

Privacy Statement
Press Release
Contact