Section II. OPERATOR MAINTENANCE PROCEDURES
3-2.1 Generator Set. Refer to TM 9-6115-639-13.
3-2.2 Power Plant. The maintenance functions that the Maintenance Allocation Chart authorizes the operator to
perform are the preventive maintenance checks and services listed in table 2-2 and the replacement of indicator
lamps located on the switch box. Perform the following steps to replace GEN 1 or GEN 2 indicator lamps:
a. Unscrew lens from lamp housing and remove lamp from lens (see paragraph 4-14).
b. Install new lamp in housing screw lens on housing (see paragraph 4-14).