TM 9-6115-658-13&P F-2Figure F-1. Electrical Lead. PARTS LIST FIND NO. PART NO. QUANTITY REQUIRED DESCRIPTION 1 M2305315-105-9 1 INSULATION SLEEVING, ELECTRICAL (2.50 LONG) 2 M525036-158 1 TERMINAL, LUG, SMALL, RING, TONGUE, FULLY INSULATED (WIRE SIZE 12-10, STUD SIZE .500) 3 M525036-114 1 TERMINAL, LUG, SMALL, RING, TONGUE, FULLY INSULATED (WIRE SIZE 12-10, STUD SIZE .375) 4 M22759116-10-9 1 WIRE, ELECTRICAL, 600 VOLT NOTES: 1. INSTALLED CRIMPED CONNECTIONS SHALL WITHSTAND AN AXIAL LOAD OF 8 POUNDS, SHALL HAVE CONTINUITY, AND SHALL SHOW NO EVIDENCE OF DAMAGE OR ARCING WHEN CRIMPED WITH TERMINAL MANUFACTURER’S RECOMMENDED CRIMPING TOOL. 2. HOT STAMP SLEEVING, FIND NO. 1, WITH WIRE ADDRESS, WITHIN 2 INCHES OF ITS TERMINATIONS. HOT-STAMPED MARKING SHALL PROVIDE VISUAL CONTRAST AND SHALL BE IMPRESSED TO A DEPTH NOT EXCEEDING ONE-FOURTH THE THICKNESS OF MATERIAL FOR PERMANENCY AND LEGIBILITY. THE ADDRESS CONSISTS OF THE “FROM TERMINATION”, A DOUBLE HEADED ARROW, AND THE “TO TERMINATION”. EXAMPLE: XK3-2 AATB1-1 3. AT PIGTAIL END OF CABLE, EACH INSULATED CONDUCTOR SHALL HAVE THEIR INDIVIDUAL STRANDS TWISTED TOGETHER AND SOLDER COATED FOR A LENGTH OF .125 FROM END USING SOLDER, FIND NO. 5.
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
