TM 9-6115-658-13&P
4-37
4-21 PLATE, ID AND REFLECTOR REPLACEMENT.
This task covers: Replacement
INITIAL SETUP
Tools
Equipment Conditions
Tool Kit, General Mechanic’s
Reference
(item 1, Appendix B)
Trailer handbrakes set, front support
leg/landing leg lowered, and rear
leveling-support jack lowered; paragraph
2-3.2.1
Materials/Parts
Plate, Identification/Transportation Data
Screws, Driver
Rivets
REPLACEMENT
1. REPLACE DATA PLATE
a. Drill out rivets (2, Figures 4-20) and remove data plate (1).
b. Position data plate (1) on trailer and install rivets (2).
2. REPLACE REFLECTORS
a. Remove self-locking nuts (3, Figure 4-20), flat washers (4), screws (5), and reflector (6) from trailer.
b. Install reflector, (6), screws (5), flat washers (4), and self-locking nuts (3) on trailer.
