TM 9-6115-604-34
NAVFAC P-8-633-34
1. CAPSCREW
6. PLAIN SOLID DISK DIAPHRAGM
2. LOCKWASHER
7. PREFORMED PACKING
3. WASHER
8. NYLON WASHER
4. BODY
9. PLATE
5. PREFORMED PACKING
10. FUEL PUMP DAMPER ASSEMBLY
Figure 6-7. Damper Assembly, Exploded View
CAUTION
Do not separate gears (10 and 13) from drive shaft (11) and Idler shaft (12) at this time. Gears
and shafts must not be Interchanged If they are to be reused. Refer to step (2)(o), below, for
disassembly procedure.
(d)
Remove the drive shaft (11), and idler shaft (12) with gears (10 and 13) from the housing (7).
Remove the drive shaft dowel ring (17) only if damaged.
(e)
Remove the pipe plugs (6) from the housing (7).
(f)
Remove the fuel inlet connection (4) from the housing (7). Remove and discard the preformed
packing (5).
6-14
