ARMY TM 9-6115-604-12
NAVY NAVFAC P-8-633-12
Table 5-3. Unit Remote Control Module Troubleshooting (Continued)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
12. SYNCHROSCOPE METER DOES NOT WORK.
Test meter In accordance with paragraph 5-9, step f.
Replace meter.
13. HORN DOES NOT WORK.
Test horn in accordance with paragraph 5-9, step t.
Replace horn.
14. LOW OIL PRESSURE, HIGH COOLANT TEMP, AND/OR FAULT LAMPS DO NOT WORK.
Test lamps, lamp holders, and blocking diodes in accordance with paragraph 5-9, step r.
Replace component as needed.
15. ANNUNCIATOR TEST, ALARM SILENCE, AND/OR EMERGENCY SHUTDOWN PUSHBUTTON SWITCHES
DO NOT WORK.
Test switches in accordance with paragraph 5-9, step s.
Replace switch.
16. MASTER (START/STOP/RUN) SWITCH DOES NOT WORK.
Test switch In accordance with paragraph 5-9, step q.
Replace switch.
17. GEN/BUS VOLTMETER SWITCH DOES NOT WORK.
Test switch In accordance with paragraph 5-9, step i.
Replace switch.
18. VOLT ADJ RHEOSTAT DOES NOT WORK.
Test rheostat In accordance with paragraph 5-9, step j.
Replace rheostat.
19. FREQ ADJ RHEOSTAT DOES NOT WORK.
Test rheostat in accordance with paragraph 5-9, step I.
Replace rheostat.
20. PARALLEL SWITCH DOES NOT WORK.
Test switch in accordance with paragraph 5-9, step k.
Replace switch.
21. PARALLEL LIGHTS DO NOT WORK.
Test lamps and lamp holders In accordance with paragraph 5-9, step p.
Replace lamp or lamp holders.
5-31
