ARMY TM 9-6115-604-12
NAVY NAVFAC P-8-633-12
(5)
Attach striker (5) to door lock support (4) with screw and captive washer assemblies (2) and nut and captive
washer assemblies (3), then mount using additional screw and captive washer assembly (2).
(6)
Install door seal (6) and attach bar (1).
(7)
Install grab handle (36) using hexagon head cap screws (8) and lock washers (10)
m.
Assembly of Right Hand (4. Figure 4-20) and Left Hand (4. Figure 4-19) Shutter Door Assemblies. Mount the
right hand/left hand control lever (8, Figure 4-21) and lever mounting bracket (7) using pin assembly (6), locking
ring (5), connecting pin (4), flat washer (3), locknut (2) and hexagon head bolt (1).
n.
Assembly of Right Hand Shutter Door Assembly (54. Figure 4-15).
(1)
Install door seal (11, Figure 4-20) onto right hand door (12).
(2)
Attach striker (10) to door lock support (9) with screw and captive washer assemblies (7) and nut and captive
washer assemblies (8), then mount using additional screws and captive washer assemblies (7).
(3)
Attach bar (6) and door holder rod (5).
(4)
Install right hand shutter assembly (4) using hexagon head cap screws (1), lock washers (2), and hexagonal nuts
(3).
o.
Assembly of Left Hand Shutter Door Assembly (14. Figure 4-15).
(1)
Install door seal (11, Figure 4-19) onto left hand door (12)
(2)
Attach striker (10) to door lock support (9) with screw and captive washer assemblies (7) and nut and captive
washer assemblies (8), then mount using additional screw and captive washer assemblies (7).
(3)
Attach bar (6) and door holder rod (5).
(4)
Install left hand shutter assembly (4) using hexagon head cap screws (1), lock washers (2), and hexagonal nuts
(3).
p.
Assembly of Fixed Frame Shutter Assemblies (18 and 12. Figure 4-15).
(1)
Mount right and left hand angles (17 and 18, Figure 4-18) onto frame assembly (19) using round head screws
(16).
(2)
Assemble the right and left hand cranks (10 and 11) and vinyl seals (12) onto each of the vane stocks (13).
Position the right and left hand control bars (14 and 15) and secure by installing each of the 23 vane assemblies
(9).
(3)
Mount the right hand control lever (8) and lever mounting bracket (7) with the pin assembly (6), locking ring (5),
connecting pin (4), flat washer (3), locknut (2), and hexagon head bolt (1)
q.
Assembly of Door Assemblies (10. Figure 4-15).
(1)
Mount the door seal (7, Figure 4-17) onto door panel assembly (8)
(2)
Attach striker (6) to door lock support (5) with screw and captive washer assemblies (3) and nut and
captive washer assemblies (4), then mount using additional screw and captive washer assemblies (3).
(3)
Install door holder assembly (2) and bar (1).
416. INSTALLATION OF RADIATOR SHUTTER ASSEMBLY.
a.
Mount support (14, Figure 4-16) and secure with hexagon head cap screws (13), lock washers (8), and hexagonal
nuts (9).
b.
Mount support (12) and secure with hexagon head cap screws (6), flat washers (7), and lock washers (8).
c.
Install shutter mounting supports (10 and 11) and secure with hexagon head cap screws (1 and 6), flat washers (4
and 7), lock washers (2 and 8), and hexagonal nuts (5 and 9).
d.
Mount the radiator shutter assembly (3) and secure with hexagon head cap screws (1), lock washers (2), and flat
washers (4)
4-59
