Figure 4-10. Rigging Lifting Attachment Kit to Lift Generator Set

TM-9-6115-604-12 Generator Set Diesel Engine Driven Tactical Skid Rtd. 60 Kw 3 Phase 4 Wire 120/208 and 240/416 Volts Manual
Page Navigation
205

ARMY TM 9-6115-604-12 NAVY NAVFAC P-8-633-12 Figure 4-10. Rigging Lifting Attachment Kit to Lift Generator Set CAUTION Prolonged exposure of leg angles assemblies to ultraviolet rays will shorten service life of lifting attachment kit. Keep leg assemblies out of direct sunlight when not In use. (6) Store leg assemblies In a sheltered area. (7) Remove hexagon head bolts, hexagonal nuts, and lock washers from spreader bar stowage angles. Install spreader bar members under cabinet A and secure to spreader bar stowage angles. Refer to Figure 4-1. (8) Close and secure generator set doors. i. Transporting Generator Set. Assure that generator set Is securely tied to platform of vehicle. Use all skid base tie downs, if possible. j. Unloading Generator Set. Select a site in accordance with paragraph 4-2, and proceed as follows: (1) Assemble lifting kit in accordance with step f, above. (2) Lift generator set in accordance with step g, above, and set generator set down onto selected site. (3) Disassemble lifting kit in accordance with step h, above 4-4. REINSTALLATION AFTER MOVEMENT. Refer to Section I of this chapter. 4-22

Privacy Statement
Press Release
Contact