Figure 4-3. Grounding Generator Set to a Buried Metal Plate

Figure 4-2. Grounding Generator set to a Driven Metal Rod

Figure 4-4. Grounding Generator set to an Underground Metallic Water Piping System

TM-9-6115-604-12 Generator Set Diesel Engine Driven Tactical Skid Rtd. 60 Kw 3 Phase 4 Wire 120/208 and 240/416 Volts Manual
Page Navigation
189

ARMY TM 9-6115-604-12 NAVY NAVFAC P-8-633-12 DO NOT OPERATE THE GENERATOR SET UNLESS it HAS BEEN PROPERLY GROUNDED, ELECTRICAL FAULTS (SUCH AS LEAKAGE PATHS) IN THE GENERATOR SET, FEEDER LINES, OR LOAD EQUIPMENT CAN CAUSE INJURY OR DEATH BY E LECTROCUTION. STEP 1. INSERT GROUND CABLES INTO SLOTS IN GROUND TERMINAL STUDS AND TIGHTEN NUTS. STEP 2. PERFORM EXCAVATION AND BURY A METAL PLATE AS SHOWN. STEP 3. ATTACH GROUND CABLE TO METAL PLATE AND CHECK THAT GOOD ELECTRICAL BOND IS ACHIEVED. Figure 4-3. Grounding Generator Set to a Buried Metal Plate. 4-6

Privacy Statement
Press Release
Contact