ARMY TM 9-6115-464-34
AIR FORCE TO 35C2-3-445-2
NAVY NAVFAC P-8-624-34
Figure 3-41. Engine Front Support, Removal and Installation
3-50. FLYWHEEL AND FLYWHEEL HOUSING.
a. Removal.
(1) Remove oil pan assembly (paragraph 3-37).
(2) Remove screws (1, figure 3-42) to remove flywheel (2) and ring gear (3) as an assembly. Do not
remove ring gear unless it is badly damaged and replacement is necessary.
(3) Remove nuts (4), Iockwashers (5), screws (6), Iockwasher (7), screw (8) and lockwasher (9) to
remove flywheel housing (10) and gasket (11). Discard gasket.
(4) Using a suitable press, remove oil seal (12) from flywheel housing and discard.
3-102
