ARMY TM 9-6115-464-34
AIR FORCE TO 35C2-3-445-2
NAVY NAVFAC P-8-624-34
Figure 3-25. Fuel Injection Nozzle Holder, Exploded View
(7) Observe fuel spray. Fuel spray shall be even and smooth. Spray cone shall be same thickness at a
distance of 5 inches. There shall be no signs of leakage.
(8) Remove fuel pressure and remove nozzle holder from testing fixture.
(9) Install washer (5, figure 3-25) and cap (4).
g. Installation. Refer to the Operator and Unit Maintenance Manual for fuel injection nozzle holder and lines
installation procedures.
3-24. FUEL LINES.
Refer to the Operator and Unit Maintenance Manual for fuel lines maintenance instructions.
3-25. START AID ASSEMBLY.
Refer to the Operator and Unit Maintenance Manual for start aid assembly maintenance instructions.
3-67
