ARMY TM 9-6115-464-12
AIR FORCE TO 35C2-3-445-1
NAVY NAVFAC P-8-624-12
5-66
Figure 5-17. Applications Kit Cable Harness Assembly Installation (Left Side)
b. Install acoustic suppression kit on generator set.
NOTE
Bottom tray assembly will only go onto unit one way. Note location of weld nuts
in relation to fork lift tunnels. Bottom tray assembly must be cleaned and rubber
seal greased with GAA prior to installing.
(1)
(2)
(3)
Using a suitable Iifting device, raise generator set and place 6"x6 blocks under skids. Lower generator
set onto blocks.
Grease inside of generator set skids with grease (GAA).
Using a suitable lifting device, raise generator set, remove 6"x6" blocks, and place 2"x4" blocks un-
der skids of generator set. Lower generator set onto 2x4 blocks. Ensure blocks are under skids
only. Do not remove tension from lifting device.