Tabulated Data (cont) - TM-9-6115-464-12

Tabulated Data (cont) - TM-9-6115-464-12_28

Table 1-1. Differences in Performance Characteristics - TM-9-6115-464-12_30

TM-9-6115-464-12 Wrench Impact Hydraulic Model MV-12-140T Manual
Page Navigation
12

ARMY TM 9-6115-464-12 AIR FORCE TO 35C2-3-445-1 NAVY NAVFAC P-8-624-12 (d) Load bank kit: DOD drawing number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72-2803 Load rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.5 KW Operating voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120/208 or 240/416 Vac 3 Phase 4 wire (e) Applications kit: MERADCOM drawing number. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13220E8189 Load rating . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 840 watts Operating voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Vdc (f) Acoustic suppression kit: Model number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MEP-004AAS Weight increase to generator set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1292 lb. Cube of generator set with kit installed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178.2 cubic feet (15) (16) (17) (18) (19) (20) (21) (22) Fuel System Diagram. Refer to Figure 1-7. Hydraulic System Diagram. Refer to Figure 1-12. AC and DC, 15 and 30KW, 50/60 and 400 Hz, Precise and Utility, Wiring Diagram, Dwg. No. 72-2205. Refer to figure FO-1. AC Schematic Diagram, 15 and 30 KW, Precise Generator Sets, Dwg. No. 72-2200. Refer to figure FO-2. DC Schematic Diagram, 15 and 30 KW, Precise Generator Sets, Dwg. No. 72-2269. Refer to figure FO-3. AC Schematic Diagram, 15 and 30KW, Utility Generator Sets, Dwg. No. 72-2295. Refer to figure FO-4. DC Schematic Diagram, 15 and 30KW, Utility Generator Sets, Dwg. No. 72-2277. Refer to figure FO-5. Shipping Dimensions and Weights. Refer to Figure 1-3. 1-12 DIFFERENCES BETWEEN MODELS.The primary differences between the models of the generator sets covered in this manual are as follows: a. b. c. d. e. f. 1-12 Models MEP-004A and MEP-103A are equipped with a 50/60 Hz generator. Model MEP-113A is equipped with a 400 Hz generator. Models MEP-103A and some MEP-113A use an electro-hydraulic governor. Other Models MEP-113A use an electric govemor. Model MEP-004A uses a mechanical governr which is integral with the fuel injection pump. The control cubicle of all three models have a frequency adjust rheostat, but it is functional only on models MEP-103A and MEP-113A. Model MEP-004A accomplishes frequency adjustment through the manual speed control. All three models use the same special relay box, but models MEP-103A and MEP-113A are also equipped with a precise relay box. The two precise relay boxes are identical with the exception that the precise relay box of model MEP-103A contains a frequency selector switch whereas the precise relay box of model MEP-113A does not. Models MEP-103A and MEP-004A use the same exciter regulator assembly and crosscurrent transform- er. These components are different on model MEP-113A. Differences in performance characteristics are given in Table 1-1.

Privacy Statement
Press Release
Contact