ARMY TM 9-6115-464-12
AIR FORCE TO 35C2-3-445-1
NAVY NAVFAC P-8-624-12
b. Removal of Radiator.
(1) Remove front top housing panel and doors (paragraph 4-85).
(2) Remove shutter control thermostat and housing (paragraph 4-37).
(3) Remove fan guards (paragraph 3-31).
(4) Loosen clamps (23, Figure 4-23) and disconnect overflow tube (24).
(5) Remove grille (paragraph 4-36),
(6) Remove nuts (25, Figure 4-23), lockwashers (26), screws (27) and flat washers (28) to remove
radiator (29).
c.
Cleaning and Inspection.
(1) Clean radiator air passages with filtered compressed air.
(2) Clean exterior surfaces with a cloth moistened with an approved solvent.
(3) Inspect radiator for corrosion, dents, bent cooling fins.
(4) Check for accumulations of rust or scale in radiator openings.
(5) Refer to paragraph 3-27 and flush radiator if necessary.
d. Installation.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Position radiator (29, Figure 4-23), to install flat washers (28), screws (27), lockwashers (26), and
nuts (25).
Install grille (paragraph 4-36).
Connect overflow tube (24, Figure 4-23) and tighten clamps (23)
Install fan guards (paragraph 3–31).
Install shutter control thermostat and housing (paragraph 4-37),
Install front top housing panel and doors (paragraph 4–85).
Fill radiator with coolant as specified in Table 2–1.
Figure 4-24. Radiator Hose Replacement
4-62
