ARMY TM 9-6115-464-12
AIR FORCE TO 35C2-3-445-1
NAVY NAVFAC P-8-624-12
4-30 DAY TANK ASSEMBLY.
a.
Removal.
(1) Refer to paragraph 3-21 and drain the day tank.
(2) Refer to paragraph 4-25 and remove fuel solenoid valve and rectifier assembly.
(3) Refer to paragraph 4-24 and remove day tank fuel level and low fuel cutoff switch.
(4) Refer to paragraph 4-34 and remove starting aid ether tank and solenoid valve.
(5) Loosen spring clamp (1, Figure 4-17) and remove vent tube (2).
(6) Disconnect fuel hose assembly (3).
(7) Remove nuts (4), lockwashers (5) and screws (6) to remove day tank with assembly parts.
b. Disassembly.
(1) Remove fuel hose assembly adapter (7).
(2) Remove drain cock (8) from day tank (9).
c.
Cleaning and Inspection.
(1) Clean day tank with a clean, lint-free cloth moistened with an approved cleaning solvent.
(2) Inspect day tank for cracks, corrosion, stripped or damaged threads or other damage.
d. Assembly
(1) Install drain cock (8).
(2) Install fuel hose assembly adapter (7).
e.
installation.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
Install screws (6, Figure 4-17), lockwashers (5), nuts (4).
Reconnect fuel hose assembly (3).
Install vent tube (2) and tighten spring clamp (1).
Refer to paragraph 4-34 and install starting aid ether tank and solenoid valve.
Refer to paragraph 4-24 and install day tank fuel level and low fuel cutoff switch.
Refer to paragraph 4-25 and install fuel solenoid valve and rectifier assembly.
Fill the day tank.
4-48
