TM5-6115-634-14&P
NAVFAC P-8-647-14&P
T0-35C2-3-445-14
TM-6115-14&P/1
MAINTENANCE OF REAR HOUSING GENERATOR SET FRAME
4-21. REPLACE REAR HOUSING FRAME
This task covers: a. Removal
b. Installation
INITIAL SETUP
Tools
General Mechanic’s
5180-00-177-7033
Materials/Parts
Housing, Generator
97403-13228E1901
Tool Kit
Set, Rear
Equipment Conditions:
Reference
Para. 4-14 Remove Baffle, Air Intake.
Para. 4-20 Remove Cover, Top Rear.
Para. 4-17 Remove Connector Plate.
TM5-6115-464-12
Remove Door Access, Control Panel
Para. 3-134.
TM5-6115-464-34
Removal Control Cubicle Assembly
Para. 4-2.
Remove Fault Locating Indicator
Para. 4-3.
General Safety Instructions
The removal/installation of the rear
housing frame requires two persons
one to hold the housing upright while
the mounting hardware is being
removed.
Failure to do so could
result in serious injury.
REMOVAL
REMOVE REAR HOUSING FRAME.
Remove four screws (1), lockwashers
(2) and nuts (3) at the bottom
right and left side of the rear
housing frame (4) and remove it.
4-28
