Change 3
minimum depth of 4 feet (1.22 M). The ground lead
must be at least No. 4 AWG copper wire. Refer to
“Operating Under Unusual Conditions” for ground
connections during mobile operation.
Wheels must be blocked, brakes set
and leg supports down in support
f
position be ore operating the equip-
ment. Failure to do so may result in
serious injury.
TM5-6115-634-14&P
NAVFAC P-6-647-14&P
T0-35C2-3-445-14
*U.S. GOVERNMENT PRINTING OFFICE: 1993- 755-028/80139
(3) Release curbside handbrake. Remove
ground rod section, the slide hammer rod and the
ground wire assembly from the accessory box.
Remove the slide hammer from the front of the
trailer.
(4) Ground the PU 794/G.
(a) Connect ground wire assemblies to
the ground stud on the connector plate of each
generator set. Select a spot on the ground
between trailers to install the ground rod.
2-10.1 /(2-10.2 blank)
