TM5-6115-634-14&P
NAVFAC P-8-647-14&P
T0-35C2-3-445-14
TM-6115-14&P/1
4-39.
INSPECT, TEST AND REPLACE JUNCTION BOX ASSEMBLY (cont)
diagram, make continuity meter
measurements of power and con-
trol wiring harness, pin-to-
pin and pin-to-ground. When
open condition or short to
ground is observed, replace the
junction box.
REMOVAL
REMOVE JUNCTION BOX ASSEMBLY.
a.
Remove four screws (6), lock-
washers (7) and nuts (8).
b.
Remove the junction box.
INSTALLATION
INSTALL JUNCTION BOX ASSEMBLY.
a.
Place the junction box onto
the trailer, matching up the
mounting holes.
b.
Install four screws (6),
lockwashers (7), and nuts (8).
NOTE
FOLLOW ON MAINTENANCE: Connect
Negative Battery Cable (Para.
4-10) .
4-59
