TM5-6115-634-14&P
NAVFAC P-8-647-14&P
T0-35C2-3-445-14
TM-6115-14&P/1
MAINTENANCE AIR CLEANER SYSTEM
4-32. REPLACE FILTER ELEMENT
This task covers: a. Removal
c. Service
b. Inspection
d. Installation
INITIAL SETUP
Tools
General Mechanic’s
5180-00-177-7033
Materials/Parts
Detergent
Filter Element
30554-70-4020
Bar Retainer
97403-13228E1883
General Safety Instructions
Tool Kit
Do not clean air filter element in
gasoline or other petroleum solvents.
Do not use compressed
wet filter.
air to dry a
Equipment Conditions:
Reference
Para. 4-9 General Instructions.
When using compressed
protection and to not
toward skin.
Pressure should not
exceed 30 psig.
Failure to observe
air, use eye
direct air
this warning could result in
serious injury.
REMOVAL
REMOVE FILTER ELEMENT.
a.
Remove two screws (1), lock-
washers (2), nuts (3) and
retainer bar (4).
b.
Remove filter element (5).
INSPECTION
INSPECT THE FILTER ELEMENT.
Place a light behind the filter
element and check for holes,
tears or other defects.
Replace
if defective.
4-49
