Table 2-2. Fabricated Tools and Equipment

Table 2-1. Special Tools, Test and Support Equipment

Table 2-2. Fabricated Tools and Equipment (Cont) - TM-5-6115-585-34_43

TM-5-6115-585-34 Generator Set Diesel Engine Driven Tactical Skid Mtd 5 KW 1 Phase 2 Wire 1 Phase-3 Wire 3 Phase-4 Wire 120 120/240 and 120/208 Volts Manual
Page Navigation
14

TM5-6115-585-34 NAVFAC P-8-262-12 TO-35C2-3-455-2 TM-05684C-34 Table 2-2. Fabricated Tools and Equipment Nomenclature Reference No. or NSN Material Required Pump mounting fixture 0.375” cold rolled steel Fabrication Instructions: Fabricate fixture as shown below. Drill “F” (0.255 in.-0.262 in.) depth thru countersink 60° incl. to 0.332 in. diameter. Tap 0.3125-18 UNC-2B depth thru. Two holes located within 0.005 in. of true position. Sketch or Diagram: 2-2

Privacy Statement
Press Release
Contact