TM  5-6115-585-34 NAVFAC  P-8-623-34 TO-35C2-3-455-2 TM-05684C/05685B-34 CHAPTER  2 GENERAL  MAINTENANCE  INSTRUCTIONS Section I. REPAIR PARTS, SPECIAL TOOLS, TEST, MEASUREMENT, AND DIAGNOSTIC EQUIPMENT  (TMDE),  AND  SUPPORT  EQUIPMENT 2-1. REPAIR PARTS. Table 2-1 contains a list of all special tools, test and Repair parts and equipment are listed and illustrated support equipment needed to maintain this unit. in  the  repair  parts  and  special  tools  list  manual 2-3.  FABRICATED  TOOLS  AND  EQUIPMENT. covering intermediate (field) (Direct and General Sup- port) and depot maintenance for this Generator Set. Table  2-2  contains  fabrication  instructions  for  all 2-2. TOOLS AND EQUIPMENT. tools  which  must  be  fabricated  by  intermediate  or depot personnel for maintenance of this unit. Table  2-1.  Special  Tools,  Test  and  Support  Equipment Item Delivery valve test fixture Pump mounting fixture Plunger spring compression tool Centering  sleeve Compression  tester gage Compression  adapter NSN Reference No. (01843)* TSE-76226 TSE-76215 TSE-773 4910-00-870-6283 4910-00-870-2127 Reference Fig. No. 7-36 7-35 7-47 7-8.1 7-8.1 Para. No. 7-18 7-18 7-18 7-20 7-8.1 7-8.1 *Federal supply code for the manufacturer. Use Testing fuel injection pump  delivery  valve Mount fuel injection pump in vise for disassembly Remove and install spring seat Assembly  of  fuel injector Test engine compression Test  engine compression Table No. 2-2 Change  3 2 -1