Top Panel Assembly - TM-5-6115-585-34

Front Panel Assembly - TM-5-6115-585-34_181

APPENDIX A REFERENCES - TM-5-6115-585-34_183

TM-5-6115-585-34 Generator Set Diesel Engine Driven Tactical Skid Mtd 5 KW 1 Phase 2 Wire 1 Phase-3 Wire 3 Phase-4 Wire 120 120/240 and 120/208 Volts Manual
Page Navigation
148

TM 5-6115-585-34 NAVFAC P-8–623-34 TO 35C2-3-455-2 TM–05684C/05685B–34 k. Top Panel Assembly. (1) Refer to figure 10-6 and clear out acoustic fill from holes in top panel assembly (24) using 3/8 inch diameter pin. (2) Locate top panel assembly (24) by aligning holes in top panel assembly (24) with captive nuts in left panel as- sembly (2), right panel assembly (21) and front panel assembly (20), and with holes in side closure assembly (4) and rear closure assembly (15). (3) Install top panel assembly (24) to left panel assembly (2), right panel assembly (21) and front panel assembly (20) with 13 screws (25) and 13 washers (26). Install top panel assembly (24) to side closure assembly (4) and rear closure as- sembly (15) with seven screws (27), 14 washers (28 and 29) and seven-locknuts (30) (as listed in Table 10-1, item 11). 1 0 - 5. (4) Torque screws (25) to (5) Torque screws (27) to POST INSTALLATION PROCEDURES. The local safety Medicine Support prior to initial WARNING 1 8 ± 2 i n . -lbs dry. 16 ±2 ft-lbs dry. office and Preventative Activity must be consulted CARC painting. Inspect ASK and generator set for any areas where touch-up painting may be required. Perform necessary touch-up painting in accordance with MIL-T-704 using paint colors green 383, brown 383, and black as required in FED-STD-595. 10-16 Change 6

Privacy Statement
Press Release
Contact