TM 5-6115-585-12
NAVFAC P-8-623-12
TO-35C2-3-445-1
TM-05684C/05685B-12
Figure 3-2. Battery Assembly
about 3/8 inch above top of plates. Check that battery
c a p s a r e n o t l o o s e a n d t h a t v e n t h o l e s a r e f r e e o f
obstructions.
b. Clean.
Be sure that none of the neutralizing solution
enters the battery cells.
(1) Clean terminal connectors (2), (10) and (11),
batteries (6) and frame using a suitable neutralizing agent
and wipe dry with a clean cloth. Notify higher level main-
tenance if terminals, cables, batteries or frame is damaged.
Protect battery terminals with a light coat of silicone base
grease.
c. Service.
(1) Fill batteries (6) with clean distilled water to a level of
3/8 inch above top of plates. In freezing weather run engine a
minimum of one hour after adding water.
3-12. GROUND ROD AND FUEL DRUM ADAPTER PIPE
HOLD-DOWN ASSEMBLY.
a. Removal (see figure 3-3). On ASK equipped generators,
remove oil access door and fuel filter access door.
( 1 ) G r o u n d R o d a n d F u e l D r u m A d a p t e r P i p e.
Loosen screws (1), lockwaahers (2). Slide ground rod pieces
(3) out of hold-down assembly (4), then slide out fuel drum
adapter pipe (5).
( 2 ) H o l d - d o w n a d a p t e r . G r a s p h o l d - d o w n a s s e m b l y
(4) and remove screw (1) and lockwaeher (2). Remove hold-
down asseembly.
C h a n g e 8 3 - 9
