TM 5-6115-585-12NAVFAC P-8-623-12TO 35C2-3-455-1TM-05682C/05685B-12(2)Remove seven screws (7) and locknuts (8), and 14washers (9 and 10) securing top panel assembly (3) to sideclosure assembly (11) and rear closure assembly (12).(3) Lift off top panel assembly (3).b.Installation.See figure 5-3.Install top panelassembly to left, right and front panel assemblies, and to sideand rear closure assemblies as follows:(1)Position top panel assembly (3) on left panelassembly (4), right panel assembly (5), front panel assembly (6),side closure assembly (11), and rear closure assembly (12).(2)Install seven screws (7) and locknuts (8), and 14washers (9 and 10) securing top panel assembly (3) to sideclosure assembly (11) and rear closure assembly (12).(3)Torque screws (7) to 16 ±2 ft-lbs dry.(4)Install 13 screws (1) and washers (2) securing toppanel assembly (3) to left panel assembly (4), right panelassembly (5), and front panel assembly (6).(5) Torque screws (1) to 18 ±2 in.-lbs dry.5-5.LEFTPANELASSEMBLYWITHSIDECLOSUREASSEMBLY.a.Removal.See figure 5-4.Remove left panel assemblywith side closure assembly from top panel, front panel, leftsupport and rear closure assemblies as follows:(1) Remove top panel assembly (1) as described inparagraph 5-4.(2)Remove four screws (2) and washers (3) securingleft panel assembly (4) to left support assembly (5).(3) Remove three screws (6) and washers (7) securingleft panel assembly (4) to front panel assembly (8).(4)Remove two screws (9) and locknuts (10), and fourwashers (11 and 12) securing side closure assembly (13) toclosure assembly (14) and lift off left panel assembly (4)side closure assembly (13) .(5)Remove three screws (15) and locknuts (16),six washers (17 and 18) securing side closure assembly (13left panel assembly (4).rearwith5-10Change 8
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
